19 July 2016

Prima Power Laserdyne introduces new dual workstation multi-axis laser processing system

Prima Power Laserdyne announces introduction of the new Dual Workstation LASERDYNE 606D multi-axis laser processing system – The Power of 2™. This new innovative system features two completely independent 3D laser processing work stations in a single structure.

The LASERDYNE 606D features two independent 3D laser workstations. Each workstation has its own 3D motion system based on linear motors (X and Y axes), carbon fiber composite moving structures, a BD3Y BeamDirector®; a S94P laser process control; and a fiber laser.

Doors are independently controlled and each workstation is isolated. This allows an operator to load or unload parts on one side while laser processing is occurring on the other side.

The 606D is ideally suited for operations with relatively high volume applications of precision 3D laser cutting, welding, and drilling and those operations where set-up and part changeover are critical. In both cases the system appeals to those who are concerned about obtaining the greatest throughput per unit area of factory floor space.

High throughput is enabled through the use of linear motors for the X and Y axes. The workstations are fast and accurate with an X-Y-Z speed of 2,000 in/min (50 m/min), 2 g acceleration, and bi-directional accuracy of 0.0008 inch (20 µm). Graphite fiber composite structures employed in the linear axes and synthetic granite material of the base all contribute to the system’s high dynamic accuracy.

Each of the workstations is configured according to its applications. For example, each workstation can have the same or different fiber laser, sensor options, and number of axes depending upon the applications for a given workstation.


Back to top