BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//AILU - The Association of Laser Users - ECPv6.15.14//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.ailu.org.uk
X-WR-CALDESC:Events for AILU - The Association of Laser Users
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20231029T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20241027T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20251006T100000
DTEND;TZID=Europe/London:20251008T150000
DTSTAMP:20260418T105024
CREATED:20250904T112804Z
LAST-MODIFIED:20250904T114207Z
UID:19559-1759744800-1759935600@www.ailu.org.uk
SUMMARY:AILU Member Event - LVD UK Technology Days 6-8 October 2025
DESCRIPTION:LVD UK is holding an Open House event from 6-8 October 2025\nClick image to expand   \n \n  \nContact: Maryse McHale \nsales.uk@lvdgroup.com \n+44 1295 676800 \n  \n 
URL:https://www.ailu.org.uk/event/ailu-member-event-lvd-uk-technology-days-6-8-october-2025/
LOCATION:LVD UK\, XP Centre\, Banbury\, OX16 3JU\, United Kingdom
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/09/LVD_UK_Open-House_-featured-image.jpg
ORGANIZER;CN="LVD UK":MAILTO:Maryse.McHale@lvdgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20251002T100000
DTEND;TZID=Europe/London:20251002T153000
DTSTAMP:20260418T105024
CREATED:20250603T110516Z
LAST-MODIFIED:20250929T091440Z
UID:19004-1759399200-1759419000@www.ailu.org.uk
SUMMARY:AILU Workshop - Micro Drilling
DESCRIPTION: \n  \n  \n \nSponsored by Luxinar \n  \nIntroduction\nChair: Mike Wakeham (Winbro) \nThe latest laser sources bring higher power and ultrashort pulse widths.  These parameters increase the quality and throughput of laser drilling in a number of materials including metals and glass. Automotive\, medical device\, semiconductor and consumer electronics manufacturers are looking for this quality and speed. Small hole diameters and minimal heat input (low distortion) are benefits that laser micro drilling can bring. \nLearn from a range of presenters who are using and manufacturing solutions in micro laser drilling. If you are contemplating the use of laser micro drilling in manufacturing or research\, this workshop is for you.  \nMeet laser drilling application experts and suppliers over this full day workshop. The venue is a short walk from Luxinar’s UK facility. During the event there will be a networking lunch where a few exhibitors will be available to discuss the products and services they offer. \nAt the end of the workshop there will be a short tour of Luxinar’s facility.  A live “remote” demonstration of their lasers in action will also be included in the agenda for the day. \n  \nProgramme:\n9:30 – 10:00 am Registration and Coffee \n10.00 – 10.10  Welcome\nYannick Galais\, Luxinar\n \n10.10 – 10.30  Microelectronics and Semiconductor Manufacturing: A Paradise for Laser Drilling? \nBen Fulford\, Luxinar \n10.30 – 10.50  High Speed Micro Drilling of Metals and Glasses \nDimitris Karnakis\, Oxford Lasers \n10.50 – 11.10  ns pulsed fibre laser: a versatile tool for drilling applications\nJack Gabzdyl\, TRUMPF \n11.10 – 11.40 Tea & Coffee Break \n11.40 – 12.00  Laser selective etching of transparent materials with modified Bessel beams\nJakob Gueye\, Heriot Watt University \n12.00 – 12.20  High aspect ratio micro-drilling in glass and SiC using percussion and single-pulse processes\nArtur Stabrawa\, Fluence Technology \n12.20 – 12.40  Advances in Laser Drilling and Metallization of TGVs for Advanced Packaging\nAshley Crane\, EKSPLA \n12.40 – 1.50 pm Lunch\, Exhibitors and Networking \n1.50 – 2.10  Micro Hole Drilling for Biomedical Applications\nMike O’Key\, OpTek Systems \n2.10 – 2.30  High speed drilling of micro holes in metallic components\nOlusola Oyelola \, Winbro Group \n2.30 – 2.50  High power laser drilling of 0.5 mm thick stainless steel\nJagdheesh Radhakrishnan\, MTC \n2.50 – 3.10  From negative to >45 Degree angles\, how to control taper during cutting & drilling processes \nDavid Bruneel\, LASEA \n3.10 – 3.20  Remote presentation of Luxinar USP Laser Applications Lab.\nLouise May\, Luxinar \n3.20 – 3.40 Tea & Coffee Break \n3.40 – 4.40 Tour of Luxinar facility \n  \nVenue\nAURA Innovation Centre\nBridgehead Business Park\nMeadow Road\nHull\nHessle\nHU13 0GD \nFind out more about AILU events (past and future) here: ailu.org.uk/events\nInterested to join our Early Careers Group? – more here: ailu.org.uk/early-careers-group\nRead about the event sponsor here: luxinar.com \n  \n  \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event \n 
URL:https://www.ailu.org.uk/event/ailu-workshop-micro-drilling/
LOCATION:AURA Innovation Centre\, Bridgehead Business Park\, Meadow Road\, Hull\, Hessle\, HU13 0GD\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/06/micro-drilling-workshop.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250924T080000
DTEND;TZID=Europe/London:20250925T160000
DTSTAMP:20260418T105024
CREATED:20250604T100327Z
LAST-MODIFIED:20250729T123849Z
UID:19033-1758700800-1758816000@www.ailu.org.uk
SUMMARY:AILU Supported Event - PLI Conferences 2025: Latest innovations in industrial laser processes
DESCRIPTION:24 & 25 September 2025\nCCI Campus\, Alsace\, Strasbourg\nEarly Bird registration closes 31 July 2025\n  \nThe CLUB LASER ET PROCÉDÉS\, in partnership with ICUBE\, IPG PHOTONICS\, IREPA LASER\, PRECITEC\, and the PHOTONICS INSTITUTE\, announces the 2025 edition of the PLI Conferences\, to be held on September 24 and 25 at the CCI Campus Alsace in Strasbourg. \nThis key event will showcase the latest advances in industrial laser processes. “PLI Conferences is a unique event in France\, bringing together industry professionals and researchers in a friendly atmosphere. It’s a privileged space for exchange where innovation meets industrial expertise” explains John LOPEZ\, President of the CLUB LASER ET PROCÉDÉS and Research Engineer at CNRS. \nHighlights include:  \n\nExpert conferences: Talks by specialists to unpack current and future challenges in the sector.\nExhibition space: Located at the heart of the catering area\, the exhibition will feature the latest technologies and solutions from participating companies.\nNetworking evening: A convivial gathering\, perfect for discussions\, idea sharing\, and innovation-driven exchanges.\nThematic panel session: An engaging discussion focused on the energy transition.\n\nCompany visits are also scheduled for September 23: \nPRECITEC – Visit the new facilities in Gaggenau with live demonstrations: laser welding\, high-performance cutting\, additive manufacturing\, and beam characterization solutions. \nIREPA LASER – Tour the industrial workshops and discover additive manufacturing and laser welding with live demonstrations of industrial applications. \nICUBE – Visit the LaserSurf lab to explore ultrashort laser processes and multimodal characterisation techniques. \nAERIAL – Visit the centre and learn about the Feerix experimental irradiation station and the facilities dedicated to advanced industrial applications.  \n  \nContact: Fanny VOINSON\ncontact@clp-laser.fr\n+33 (0)3 88 65 54 26 \nhttps://www.clp-laser.fr/fr/evenement/pli-conferences-2025 \n 
URL:https://www.ailu.org.uk/event/ailu-supported-event-pli-conferences-2025-latest-innovations-in-industrial-laser-processes/
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/png:https://www.ailu.org.uk/wp-content/uploads/2025/06/Screenshot-2025-06-04-at-10.47.26.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250619T140000
DTEND;TZID=Europe/London:20250619T150000
DTSTAMP:20260418T105024
CREATED:20250512T104441Z
LAST-MODIFIED:20250514T100954Z
UID:18833-1750341600-1750345200@www.ailu.org.uk
SUMMARY:AILU Free Webinar: Implementing Beam Shaping
DESCRIPTION:Sponsored by\n \n  \n  \n  \nThursday 19th June 2025\, 14:00 – 15:00 BST\n  \nFree online webinar\n \n \n  \n  \n  \nImplementing Beam-shaping in the Laser Industry:\nOpportunities and Challenges\nSpeaker: Gwenn Pallier\, Product Line Manager\, Cailabs \nLearn how beam-shaping is used to improve performance in laser material processing applications including welding\, cutting\, micro-processing and additive manufacturing. \nThere are many methods to achieve laser beam-shaping\, find out more about how they work and what the advantages and challenges are in each case. \nDiscover examples of applications where MPLC (Multi Plane Light Conversion) from Cailabs has enabled the following benefits: \n\nEnhanced process quality\nIncreased process speed\nImproved depth of focus\n\nBeam-shaping is a hot topic in 2025\, this webinar will help you understand how to access the benefits presented by the latest technology. \nAs well as a presentation\, there will be the opportunity to have questions answered in a Q&A session at the end of the webinar. \nThe webinar will be recorded and accessible for free via YouTube and Vimeo. \nThe PDF version of the PowerPoint slides will be available after the webinar. \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________ \nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/ailu-free-webinar-beam-shaping/
LOCATION:Online
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/05/cailabs-webinar.jpg
ORGANIZER;CN="AILU":MAILTO:events@ailu.org.uk
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250617T090000
DTEND;TZID=Europe/London:20250617T123000
DTSTAMP:20260418T105024
CREATED:20250514T095213Z
LAST-MODIFIED:20250611T085635Z
UID:18844-1750150800-1750163400@www.ailu.org.uk
SUMMARY:AILU Event: Early Careers Group Event
DESCRIPTION:Tuesday 17th June\nLoughborough University\nFounded in 2017\, AILU’s Early Careers Group (ECG) represents the next generation of laser industry and academic professionals. Members of the Group are from a variety of industrial laser backgrounds including research centres and industrial manufacturers\, suppliers and subcontractors. \nOn Tuesday 17th June the Group will host a seminar followed by a tour of the laser facilities at Loughborough University. Members of the ECG will deliver presentations highlighting the current focus of their research or laser interests. \nThe seminar is open to AILU members and non-members and would be of interest to those who might like to join this group or would benefit from networking with this enthusiastic and talented pool of individuals. \n  \nProgramme\n09:30 – 10:00  Registration & Refreshments  \n10:00 – 10:05  Welcome – Jacob Lavin\, Loughborough University \n10:05 – 10:25  \nGas Dynamic Interactions in Laser Cutting\nJacob Lavin\, Loughborough University \n10:25 – 10:40  \nRemote laser welding of Zn-coated steel to aluminium for automotive structural applications\nAli Baghbani Barenji\, University of Warwick \n10:40 – 10:55  \nUtilising spherical aberration in laser processing\nDan Wilson-University of Manchester \n11:00 – 13:00  Tour of Optical Engineering Building & Emergent Photonics Research Centre \n13:00 – 14:00  Lunch \n  \nVenue\nSir David Davies Building\nLoughborough University\nLE11 3TU \nSee page 5 of campus map\, Building 14 here and venue map here  \nParking permit required for those attending by car which can be paid for in advance or on arrival – https://www.lboro.ac.uk/services/fm/services/traffic-parking/visitors/
URL:https://www.ailu.org.uk/event/ailu-event-early-careers-group-seminar/
LOCATION:Loughborough University\, Epinal Way LE11 3TU\, Loughborough\, LE11 3TU\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/05/ECG.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250521T133000
DTEND;TZID=Europe/London:20250521T143000
DTSTAMP:20260418T105024
CREATED:20250212T092240Z
LAST-MODIFIED:20250513T145829Z
UID:18021-1747834200-1747837800@www.ailu.org.uk
SUMMARY:AILU's 31st Annual General Meeting 2025
DESCRIPTION:Notice of the 2025 Annual General Meeting\nThe 31st Annual General Meeting of the Association of Industrial Laser Users will take place from  on 21 May 2025 at AME\, Coventry. \nAILU Member Event\, free to attend. \n \nVenue\nAME\nBeresford Ave\nCoventry\nCV6 5LZ \n  \nPlease follow this link for information on security and parking https://www.ailu.org.uk/wp-content/uploads/2025/05/Getting-to-AME.pdf \n  \nDocuments\nNotice of AGM \nAgenda  \nMinutes of the last meeting \nAILU Accounts to 31 Oct 2024
URL:https://www.ailu.org.uk/event/ailus-31st-annual-general-meeting-2025/
LOCATION:AME\, Coventry\, Beresford Ave\, Coventry\, CV6 5LZ\, United Kingdom
CATEGORIES:Members only
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/04/agm-2025-website.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250521T100000
DTEND;TZID=Europe/London:20250521T133000
DTSTAMP:20260418T105024
CREATED:20250212T094248Z
LAST-MODIFIED:20250513T145729Z
UID:18023-1747821600-1747834200@www.ailu.org.uk
SUMMARY:Laser Safety - AILU workshop
DESCRIPTION:Introduction\n \nChair: Bethan Smith (MTC) \nLaser safety is of paramount importance to ensure that the laser can be a manufacturing tool that is implemented widely and not considered a high-risk technology. Modern PPE\, guarding and accessories make laser safety possible in a research or manufacturing environment.  \nWhat should be considered to enable the safe use of lasers? It is not only about the laser beam\, which can be stopped using interlocks\, guarding and PPE. Other risks are also significant. Laser processes\, like conventional processes\, generate fume that is hazardous to the operators and any personnel nearby. There are other risks to consider too. \nThis workshop will set out the latest amendents to the laser safety standards\, discuss the latest evolutions of PPE for laser processing and consider how automation is a good alternative to reducing the skill required and the risk to operators when using hand held laser welders. \nWho should attend?:\nAnyone with a safety role in an organisation where lasers are currently in use (or being considered for use).\nAnyone about to buy or currently using a hand held laser system.\nAnyone interested in ensuring that the safety in their workplace is up to date \nThe 2025 AILU AGM will follow this workshop\, from 13:30 – 14:30 (see here). \nProgramme\n10:00 – 10:30  Registration \n10:30 – 10:40 Welcome\nBethan Smith\, MTC \nSession 1\n \n10:40 – 11:00 Forthcoming Amendments and new laser safety standards\, evolutions of laser PPE and a request for laser user feedback\nNeal Croxford\, Dovecote Technologies \n11:00 – 11:20 Automating existing hand-held laser welding systems to enhance safety\nSinan Bilgin\, SS Laser Solutions \n11:20 – 11:50 Laser Fume & Filtration\nRichard Bloomfield\, Donaldson BOFA \n11:50 – 12:10 Training & PPE for Laser Safety\nPreetesh Mistry\, Pro-Lite Technology \n12:10 – 12:30 Discussion Session – Q&A – How to promote and deliver strong laser safety in 2025\nDave MacLellan\, AILU \n12:30 – 13:30  Lunch \n13:30 AILU AGM (optional) \n  \nVenue\nAME\nBeresford Avenue\nCoventry\nCV6 5LZ \nPlease follow this link for information on security and parking https://www.ailu.org.uk/wp-content/uploads/2025/05/Getting-to-AME.pdf \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________ \nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/lasersafety-ailu-workshop/
LOCATION:AME\, Coventry\, Beresford Ave\, Coventry\, CV6 5LZ\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/04/laser-safety-news.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250514T180000
DTEND;TZID=Europe/London:20250514T190000
DTSTAMP:20260418T105024
CREATED:20250429T130809Z
LAST-MODIFIED:20250429T131301Z
UID:18746-1747245600-1747249200@www.ailu.org.uk
SUMMARY:AILU Member Webinar: Advancing precision welding through process simulation (FLOW SCIENCE)
DESCRIPTION:REGISTER HERE\nLearn how predictive modelling in FLOW-3D WELD can help you efficiently find process windows and optimise parameters for specific targets\, enabling you to: \n\nAccelerate weld schedule development\nResolve defects such as porosity and lack of fusion\nProduce high quality joints for dissimilar metals\nOptimise for throughput and joint integrity\n\nWith melt pool dynamics at the heart of process control\, FLOW-3D WELD provides access to testing without needing to burn through material or use up machine time. With less scrap and more yield\, manufacturers can free up resources for increased production or expanding into new markets.
URL:https://www.ailu.org.uk/event/ailu-member-webinar-advancing-precision-welding-through-process-simulation-flow-3d-weld/
LOCATION:Online
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/04/Flow-3D-weld-webinar.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250326T090000
DTEND;TZID=Europe/London:20250327T160000
DTSTAMP:20260418T105024
CREATED:20240627T122520Z
LAST-MODIFIED:20250422T092227Z
UID:16669-1742979600-1743091200@www.ailu.org.uk
SUMMARY:AILU's Industrial Laser Applications Symposium (ILAS) 2025
DESCRIPTION:Full-time student rate is for those registered as a full-time student. Those salaried or on paid internships should choose a ticket at the appropriate delegate rate. \nN.B. AILU has been awarded an Optica Global Meeting Grant to help students attend ILAS 2025. Universities can register ONE student to attend ILAS 2025 as a delegate\, free of charge (they will still need to cover T&S costs). Free registration will be allocated on a first-come-first-served basis. To nominate a student please email events@ailu.org.uk \nILAS 2025 is a unique 2-day event that attracts international delegates and speakers to share the latest in laser material processing.  You are guaranteed to make new contacts\, expand your network\, find business or collaboration opportunities\, meet potential employers and employees to develop your organisation or career. \nThe symposium will be packed with presentations and exhibitions. It’s where academia meets industry for all things industrial laser related\, so don’t miss out. \nSee the dedicated ILAS 2025 webpage here https://ilas2025.co.uk/ \nSee Event Booking T&Cs here  \nSee Events Code of Conduct here 
URL:https://www.ailu.org.uk/event/ailus-industrial-laser-applications-symposium-ilas-2025/
LOCATION:Chesford Grange Hotel\, Kenilworth\, CV8 2LD\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/06/ilas-2025-landscape-600-px-wide.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250304T103000
DTEND;TZID=Europe/London:20250304T170000
DTSTAMP:20260418T105024
CREATED:20250108T142046Z
LAST-MODIFIED:20250108T142508Z
UID:17739-1741084200-1741107600@www.ailu.org.uk
SUMMARY:AILU Member Event: Smart Fibre Optic High Power Photonics (HiPPo) Industry Day
DESCRIPTION:The Optoelectronics Research Centre\, University of Southampton\, is delighted to invite you to the next HiPPo Industry Day\, a unique opportunity to connect with leading researchers and industry experts in the field of high-power photonics. \nThe event will take place on Tuesday 4 March 2025 at the University of Southampton. \nPlease register your attendance through this Eventbrite link – https://www.eventbrite.co.uk/e/hippos-industry-day-tickets \nYou can find more information about the event here. For more information about the HiPPo project\, please visit our website https://www.hippo-laser.co.uk/
URL:https://www.ailu.org.uk/event/ailu-member-event-hippo-industry-day-4-march-2025/
LOCATION:University of Southampton\, Highfield Campus\, Southampton\, United Kingdom
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/01/HiPPo-image.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250204T090000
DTEND;TZID=Europe/London:20250206T170000
DTSTAMP:20260418T105024
CREATED:20250115T092746Z
LAST-MODIFIED:20250115T122505Z
UID:17776-1738659600-1738861200@www.ailu.org.uk
SUMMARY:AILU Supported Event - Southern Manufacturing & Electronics Show 2025
DESCRIPTION:4-6 February 2025\nFarnborough International Exhibition Centre\nThis is the must-attend event for professionals in design\, engineering\, production\, and procurement. It’s the go-to place to discover the latest in production hardware\, components\, consumables\, and cutting-edge technology. The expo caters to a diverse range of industries\, including Aerospace/Defence\, Automotive\, Electronics Assembly/Production\, Industrial Machinery\, Packaging/Handling/Logistics\, Energy\, Marine\, Medical/PharmaBio\, Mechanical Engineering\, and Metal Processing. \nSouthern Manufacturing & Electronics is your opportunity to explore a wide array of solutions all in one place. Whether you’re in Aerospace\, Automotive\, Electronics\, or any of the other mentioned sectors\, you’ll find the innovations and tools you need to excel in your field. \nAs Southern Manufacturing & Electronics 2025 approaches\, we invite professionals from all industries to join us for a year of discovery\, innovation\, and networking. Stay tuned for updates as they prepare to showcase the latest advancements and solutions in design\, engineering\, production\, and procurement. Mark your calendars and get ready for an immersive experience at Southern Manufacturing & Electronics 2025! \nFind out more: https://www.southern-manufacturing-electronics.com/show-information
URL:https://www.ailu.org.uk/event/ailu-supported-event-southern-manufacturing-electronics-show-2025/
LOCATION:Farnborough International Exhibition Centre
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2025/01/SME.2024.3271-compressed.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250128T090000
DTEND;TZID=Europe/London:20250128T160000
DTSTAMP:20260418T105024
CREATED:20241217T104840Z
LAST-MODIFIED:20241217T160945Z
UID:17668-1738054800-1738080000@www.ailu.org.uk
SUMMARY:AILU Member Event: Dynamic Beam Shaping for High-Power Laser Beam Welding
DESCRIPTION:This workshop\, part of the EU-funded Lasers4MaaS project\, explores cutting-edge advancements in laser welding technologies with a focus on dynamic beam shaping. Tailored for scientists\, academics and professionals in high-value manufacturing\, this free event aims to review current developments and applications of dynamic beam shaping for the laser welding industry\, aided by latest advances in digital manufacturing. Attendees will have a chance to see the dynamic beam shaping technology in action with live demonstrations in the “Advanced Laser Welding with Dynamic Beam Shaping Lab” at WMG\, The University of Warwick. \n\nSee here for more details and to register https://epic-assoc.ac-page.com/Lasers4MaaS_workshop \n\n\n\n\n\n \n\n\nProgramme\n\n\n\n\n\n\n09:00-09:30 Registration and welcome coffee \n09:30-09:35 Introduction to the event and welcome (Pasquale Franciosa\, WMG) \n09:35-09:50 WMG HVM Catapult Supporting UK Advanced Manufacturing (Simon Webb\, WMG HVM Catapult) \n09:50-10:10 UK Laser Welding Market (Mark Thompson\, Photonics Express) \n10:10-10:30 Overview of CIVAN Lasers and Dynamic Beam Shaping (Ruben Cesana\, CIVAN Lasers) \n10:30-11:00 Coffee break \n11:00-11:30 Potentials of Beam Shaping Strategies and Machine Learning in Laser Welding (Volkher Onuseit\, IFSW) \n11:30-12:00 Laser Welding with Dynamic Beam Shape Technology: Case Studies on Aluminium Alloys (Aleksey Kovalevsky\, Israel Institute of Metals) \n12:00-13:00 Lunch \n13:00-13:30 Research in Welding and Digital Technologies for Product Diversification (Domenico Stocchi\, ECOR International) \n13:30-14:00 Welding of Thick Sections with Pure Dynamic Beam Laser (Simone Peli\, Castellini) \n14:00-14:30 Presentation of the LasersMaaS Programme (Pasquale Franciosa\, WMG) \n14:30-15:00 Coffee break \n15:00-16:00 Tour of WMG Laser Beam Welding Lab and Live Demonstration of the CIVAN OPA6  \n  \n\n 
URL:https://www.ailu.org.uk/event/dynamic-beam-shaping-for-high-power-laser-beam-welding/
LOCATION:University of Warwick\, Coventry\, CV4 7AL\, United Kingdom
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/12/Workshop-Dynamic-Beam-Shaping-for-High-Power-Laser-Beam.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20241119T110000
DTEND;TZID=Europe/London:20241120T150000
DTSTAMP:20260418T105024
CREATED:20240813T123720Z
LAST-MODIFIED:20241113T120918Z
UID:16956-1732014000-1732114800@www.ailu.org.uk
SUMMARY:AILU's Early Careers Group Event
DESCRIPTION:Early Careers Group 2-day Event\n19-20 November 2024\n  \n19 November\nHeriot-Watt University\, Edinburgh\n\nEarly Careers Group Seminar\nTour of the National Robotarium\nECG Meeting \n\n  \n20 November\nCoherent\, Glasgow\n\nSite visit
URL:https://www.ailu.org.uk/event/ailus-early-careers-group-event/
LOCATION:Heriot-Watt University\, Edinburgh
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/06/ECG_seminar-attendees-050624.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20241114T094500
DTEND;TZID=Europe/London:20241114T160000
DTSTAMP:20260418T105024
CREATED:20240813T122850Z
LAST-MODIFIED:20241112T211714Z
UID:16951-1731577500-1731600000@www.ailu.org.uk
SUMMARY:AILU's Annual Job Shop Business Meeting
DESCRIPTION:Introduction\nThe laser manufacturing sector contains over 150 subcontractors in the UK. If you are a member of this community or in the supply chain\, this meeting is for you! \nNot a member of AILU? No problem! Non-members are welcome too. Talk to us about special offer tickets for non-members in the laser subcontract industry – especially if you have never experienced this meeting before.  \nAfter this event\, you will take away vital information which can make a real difference to your business. By mixing with industry peers\, the AILU Job Shop Members can benchmark their performance in a number of business areas. This meeting will focus on Carbon Footprint reduction\, Safety and Diversification – so that participants have the information to determine the future directions of their business.  Plenty of time is set aside in the programme for networking and discussion with delegates and presenters. \nAs well as the above there will be the usual opportunities to catch up with the latest new technology on the market\, the results of the Scrap Metal Survey and the Open Discussion Forum which allows people to ask any question that may be answered by our panel of experts or participants in the audience.  \nProgramme\n09:15 – 09:45   Registration & refreshments \n09:45 – 09:50   Welcome & Introduction\nChris Waters (Chair of AILU Job Shop Group) \n09:50 – 10:05  Introduction to Bystronic\nAndrew Richert (Bystronic UK) \n10:05 – 10:20   Why and How Should You Reduce Your Carbon Footprint?\nDave MacLellan (AILU) \n10:20 – 10:40  Update on Buying Electricity in 2024\nMike Stafford (Control Energy Costs) \n10:40 – 11:00  Is it Time to Invest in Solar PV?\nJames Cunningham (Geo Green Power) \n11:00 – 11:30  Refreshments \n11:30 -11:50  Safety of Hand-held Laser Systems\nDavid Lawton (Kentek) \n11:50 -12:05  Contract manufacturing of Micro Parts \nNadeem Rizvi (Laser Micromachining) \n12:05 -12:20 More Than Just Laser Cutting – Processing Opportunities\nChris Waters (Micrometric) \n12:20-12:40 Should You Buy a High Power Laser Cutter?\nJohn Powell (Laser Expertise) \n12:40 – 13:40  Lunch \n13:40 – 14:40  What’s new – short commercial presentations\nShort company pitches (10 mins each): Bystronic\, Lantek\, FICEP\, BLM\, TLM Laser\, Nitrogen Supply Co \n14:40 – 14:50 AILU Scrap Metal Survey Results\nDave MacLellan (AILU) \n14:50-15:30  Open Discussion Forum \n15:30  Close \n  \n 
URL:https://www.ailu.org.uk/event/ailus-annual-job-shop-business-meeting-2/
LOCATION:Bystronic UK\, 6 Wayside Business Park\, Wilsons Lane\, Coventry\, CV6 6NY\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/08/Bystronic-laser-image.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20241106T090000
DTEND;TZID=Europe/London:20241106T160000
DTSTAMP:20260418T105024
CREATED:20240904T141445Z
LAST-MODIFIED:20240905T090209Z
UID:17069-1730883600-1730908800@www.ailu.org.uk
SUMMARY:MTC Event: Laser Matters
DESCRIPTION:LIMITED SPACES – REGISTER YOUR INTEREST HERE \nMaking its return from Liverpool in 2023\, the MTC is hosting our annual Laser Matters event on the Wednesday 6th November at our site at Ansty Park\, Coventry. \nThis event is a go-to for those with an interest in laser technology and exhibits why the MTC and UK manufacturing is a global leader within this area. Hear from key experts as they discuss topics such as: \n•    The future directions of lasers \n•    Laser processing in medical\, aerospace\, tooling\, rail and automotive \n•    AI laser source \n•    Water jet guided laser processing \n•    High power laser drilling/cutting \n•    Process monitoring \nThere will also be the opportunity to tour the MTC laser facilities\, giving you an insight into why the MTC has been named the Centre of Excellence for Laser Processing. \nGrasp the chance to conversate with like-minded individuals during the open networking sessions throughout the day\, over a coffee or a bite to eat from our exquisite in-house catering staff. \nThere will be limited spaces available for this event\, so make sure you register your interest now: www.the-mtc.org/laser-matters-2024
URL:https://www.ailu.org.uk/event/mtc-event-laser-matters/
LOCATION:MTC\, Ansty Park\, Coventry\, CV7 9JU\, United Kingdom
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/09/Laser_Matters_600w.jpg
ORGANIZER;CN="MTC":MAILTO:laser@the-mtc.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20241002T110000
DTEND;TZID=Europe/London:20241002T120000
DTSTAMP:20260418T105024
CREATED:20240715T170230Z
LAST-MODIFIED:20241002T155548Z
UID:16806-1727866800-1727870400@www.ailu.org.uk
SUMMARY:AILU Free Webinar: Your Path to Net Zero
DESCRIPTION:Sponsored by\n \n  \n  \n  \n  \nFree online webinar\n\n  \n  \n  \n \nWednesday 2nd October 2024\n11:00 – 12:00 BST\n  \nNet Zero Webinar\nWherever you are on your Net Zero journey\, Control Energy Costs and Auditel will help you get started or take you to the next step. \nIn this webinar\, you’ll receive simple advice and support from their expert speakers. \n  \nWhy Net Zero matters \nSome businesses are early adopters and are already on their Net Zero journey; they’re emotionally motivated to act to reduce their business’s impact on the environment. \nHowever\, some businesses are waiting to be pushed to act. The importance of Net Zero cannot be overstated – supply chain pressures are mounting because of suppliers’ carbon footprint. \nSome businesses are being excluded from tenders due to their inaction on Net Zero. Already\, plans are in place to make carbon a balance sheet item that accountants will be advising businesses to reduce. Implementing a Net Zero plan won’t cost you money – it will actually save businesses money in the long term. Control Energy Costs and Auditel can help make it simple for businesses to start their journey. \nSpeakers \nNigel Addison-Evans\, Client Relationship Manager at Control Energy Costs. \nDavid James\, Managing Partner at Auditel. \nContact Nigel if you have any questions or for more information. \n  \nAs well as a presentation\, there will be the opportunity to have questions answered in a Q&A session at the end of the webinar. \nThe webinar will be recorded and accessible for free via YouTube and Vimeo. \nThe PDF version of the PowerPoint slides can be viewed here 
URL:https://www.ailu.org.uk/event/ailu-free-webinar-path-to-net-zero/
LOCATION:Online
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/07/Your-journey-to-Net-Zero-2nd-October-2024-FREE-WEBINAR.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240925T093000
DTEND;TZID=Europe/London:20240925T160000
DTSTAMP:20260418T105024
CREATED:20240704T125727Z
LAST-MODIFIED:20240919T131401Z
UID:16710-1727256600-1727280000@www.ailu.org.uk
SUMMARY:AILU Workshop - High Power and Hybrid Laser Welding
DESCRIPTION:Introduction\n \nChair: Wojciech Suder (Cranfield University) \nHigh power laser welding together with beam shaping has transformed the quality\, speed and gap tolerance of joining thick materials. In addition\, sometimes the hybrid laser-arc welding process (HLAW) is used to make single pass welds \n with simultaneous laser beam welding and a MIG welding arc (GMAW) to achieve a combination of deep penetration\, low heat input and perfect side wall fusion. This can allow alloy welding wires to be used\, and deliver much higher throughput than multi-pass multi-layer arc welding. It also minimises distortion. \nIn parallel with hybrid arc welding\, beam shaping is being used to improve the quality of welding\, especially in reflective materials like aluminium and copper which are often used in e-mobility applications\, for reasons of their high conductivity. \nOther research into hybrid ultrasonic and laser welding is showing some benefits in the minimisation of inter-metallics and improvements in weld speed. \nWith greater laser power\, comes the need for greater laser safety considerations. The challenge to build in laser safety when the raw laser beam is above 10 kW is something that the industry is only now starting to get to grips with. \nThis workshop is aimed at sharing the latest results from researchers and manufacturers in the field of laser welding in the multi-kW regime. As price per watt continues to fall and wall-plug efficiency improves\, the inherent viability of laser welding and the ease with which it can be automated makes it more and more the process of choice. \nA range of speakers will present and exhibitors offering products to this market will be on hand to share information about their capabilities.  Cranfield University is situated conveniently close to the M1 and on the outskirts of Milton Keynes. \n  \nProgramme\n09:30 – 10:00  Registration & Refreshments \n10:00 – 10:10  Introduction & Welcome\nWojciech Suder\, Cranfield University \n10:10 – 10:30  Novel Hybrid Laser Welding \nDavid Rico Sierra\, Cranfield University \n10:30 – 10:50 High-Power Laser Welding: A Comparative Study involving Cu and Al\nRaga Meenakshisundaram\, AMRC North West \n10:50 – 11:10 Laser Beam Welding of Thick-Walled Components – Technologies\, Challenges & Potential\nBenjamin Kessler\, Fraunhofer IWS \n11:10 – 11:40 Break \n11:40 – 12:00  Critical Factors When Customising Cored Wires for Laser Welding\nLeonor Neto\, Welding Alloys \n12:00 – 12:20 Safety Enclosures for High Power Lasers\nDavid Samuel\, Kyrus Automation \n12:20 – 12:40 Predicting and Improving Hairpin Weld Quality with a Process Simulation\nMarcin Serdeczny\, Flow Science        \n12:40 – 13:40  Lunch \n13:40 – 14:00  High Power Laser Welding and Hybrid Welding in Structural Steel\nBerthold Kessler\, IPG Photonics \n14:00 – 14:20 Latest Developments in Laser in Vacuum Welding\nMax Nentwich\, Cambridge Vacuum Engineering \n14:20 – 14:40  Beam Shaping for HLAW Welding of Thick Stainless-steel Plates with Multi-Plane Light Conversion\nPu Jian\, Cailabs \n14:40 – 15:00 Break \n15.00 – 16.00 – Tour of the Welding & Additive Manufacturing Centre  \n  \n  \nVenue\nVincent Building\nCranfield University\nCranfield\nBedfordshire\nMK43 0AL \nCLICK HERE TO VIEW SITE MAP \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event \n 
URL:https://www.ailu.org.uk/event/ailu-workshop-high-power-and-hybrid-laser-welding/
LOCATION:Cranfield University\, College Rd\, Wharley End\, Bedford\, Bedfordshire\, MK43 0AL
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2022/05/Cranfield-welding-image-website-crop.jpg
GEO:52°04'18.4"N;0°37'42.2"W
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Cranfield University College Rd Wharley End Bedford Bedfordshire MK43 0AL;X-APPLE-RADIUS=500;X-TITLE=College Rd\, Wharley End:geo:0°37'42.2"W,52°04'18.4"N
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240919T150000
DTEND;TZID=Europe/London:20240919T160000
DTSTAMP:20260418T105024
CREATED:20240805T122257Z
LAST-MODIFIED:20241002T123657Z
UID:16914-1726758000-1726761600@www.ailu.org.uk
SUMMARY:AILU Free Webinar: Melt pool simulations for welding process optimization
DESCRIPTION:Free online webinar\n\n  \n  \n  \n \n \nThursday 19th September 2024\n15:00 – 16:00 BST\n  \nOverview\nThe solutions to common welding defects such as porosity\, cracking\, and lack of fusion can be difficult to pinpoint when relying solely on experimentation\, which provides limited details about process dynamics. CFD can drive experimental analysis through simulations of melting and solidification that address challenges in controlling heat input and keyhole stability\, fusing dissimilar metals\, and producing desired surface roughness. In this technical webinar we review case studies including laser welding battery casings\, busbars\, and hairpins\, and discuss how FLOW-3D WELD simulations are effectively used to: \n\nTune and optimize process parameters in laser welding\nIdentify and understand defect formation\nGuide process and material decisions\n\n  \nWho should attend?\n\nWelding process engineers\nWelding research scientists\nMachine operators\nMetallurgists\nMaterials scientists / engineers\nLaser application engineers\n\n  \nTopics to be covered\n\nMelt pool simulation of laser welding\nControlling keyhole stability and porosity\nFusing dissimilar metals\nLaser welding case study: battery casings\nLaser welding case study: busbars\nLaser welding case study: hairpins\n\n  \nWhat you will learn\n\nWhat parameters affect quality when laser welding sensitive components and dissimilar materials\nHow melt pool modeling is used to tailor processes for optimal outcomes\nHow simulations can compliment experimental work to achieve better welds\n\nAs well as a presentation\, there will be the opportunity to have questions answered in a Q&A session at the end of the webinar. \nThe webinar will be recorded and accessible for free via YouTube and Vimeo. \n  \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/ailu-free-webinar-melt-pool-simulations-for-welding-process-optimization/
LOCATION:Online
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/08/Flow-3D-event-image.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240915T080000
DTEND;TZID=Europe/London:20240919T160000
DTSTAMP:20260418T105024
CREATED:20240227T134316Z
LAST-MODIFIED:20240715T163356Z
UID:15819-1726387200-1726761600@www.ailu.org.uk
SUMMARY:13th CIRP Conference on Photonic Technologies (LANE 2024)
DESCRIPTION:LANE 2024\n15 – 19 September 2024\, Fürth\, Germany\nModern research has to act on social\, economic and environmental developments to provide solutions for the existing and upcoming global challenges. For this reason\, LANE offers a platform for an international exchange of ideas\, opinions\, perspectives\, results and solutions concerning photonic technologies. In order to give a detailed overview\, the conference aims not only at scientific contributions\, but integrates the industrial perspective and their relevance for application as well. \n  \nConference Program\nFor the detailed conference program please see: www.conftool.com/lane-conference-2024/sessions.php \nWith about 200 peer-reviewed contributions on laser materials processing from science and industry\, award ceremonies\, an industrial exhibition as well as many side events LANE conference offers an ideal platform for discussion\, networking and more. Registration for participants and exhibitors is possible until September 04\, 2024. \n  \nConference Scope & Themes\nLaser Material Processing: \n\nAdditive Manufacturing\nBeam Sources & Components\nLaser Assisted Processes\nLaser Beam Cutting & Drilling\nLaser Beam Welding\, Brazing & Soldering\nLaser Safety\nPrecision Processing with Short & Ultrashort Pulses\nSensing & Control\nSimulation & Modelling\nSurface Treatment & Forming\n\nEmerging Technologies & Hot Topics: \n\nArtificial Intelligence (AI) & Machine Learning\nFast Beam Manipulation & Beam Shaping\nMaterial Processing in the Visible Wavelength Range\nIndustry 4.0 & Digitalization \n\n Special Sessions: \n\nLaser Processes for Future Mobility (Joint Session with the AITEM LaserEMobility Community)\nSolidification Cracks during Laser Beam Welding\nCountry Special: Laser Technology in Singapore\n\n \nExhibition\nThe conference will include an exhibition and different exhibition packages are available. These offer companies the opportunity to present their products and services to the conference participants (https://www.lane-conference.org/exhibitors-sponsors/book-your-package/). \n \nConference Venue\nStadthalle Fürth\nRosenstraße 50\n90762 Fürth\nGermany \n  \nFind out more about LANE 2024 here https://www.lane-conference.org/
URL:https://www.ailu.org.uk/event/13th-cirp-conference-on-photonic-technologies-lane-2024/
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/02/LANE-2024.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240711T093000
DTEND;TZID=Europe/London:20240711T160000
DTSTAMP:20260418T105024
CREATED:20240418T114041Z
LAST-MODIFIED:20240913T145649Z
UID:16144-1720690200-1720713600@www.ailu.org.uk
SUMMARY:AILU Workshop: Laser Applications in E-Mobility
DESCRIPTION:Introduction\n \nChair: Pasquale Franciosa\nWMG\, University of Warwick\nWith the drive towards electrification of transport by road\, air and sea this topic is a key focus for laser material processing applications right now. This event will explore the latest advances\, trends\, and challenges in the rapidly evolving fields of battery manufacturing technology and electric mobility. \n  \nSpeakers from research\, manufacturing and the subcontract industry are included in the schedule together with those in the supply chain for laser welding\, cutting\, texturing and drying. Optics and beam delivery as well as innovative laser sources are driving advances – often in challenging reflective materials like aluminium alloys and copper. \nThis event is for: \n\nIndustry professionals who are seeking to adopt laser processing in battery and related industries\nResearchers and academics focused on advanced technology for battery assembly\nSuppliers of products and services to the automotive\, aerospace and transportation sector\n\nThere are opportunities to network with other delegates\, presenters and exhibitors over generous coffee breaks and an extended lunch. After the event there is an option to tour the facilities at WMG where you can see the implementation of laser welding in e-mobility and discover the research areas that are being investigated. \n  \nProgramme \n09:30 – 10:00  Registration & Refreshments \n10:00 – 10:10  Introduction & Welcome\nPasquale Franciosa\, WMG \n10:10 – 10:30  Effect of static laser beam shaping on gap bridging for welding copper hairpins\nLara Al Botros\, WMG \n10:30 – 10:50  A CFD study on laser cutting and ultra-thin copper foils for e-mobility applications\nAlessandro Fortunato\, University of Bologna \n10:50 – 11:10  Electron beam welding for battery pack production\nColin Ribton\, TWI \n11:10 – 11:40 Break \n12:00 – 12:20  Artificial Intelligence in camera-based online process monitoring\nAxel Luft\, Scansonic \n12:20 – 12:40  Beam shaping to change challenging laser welding process into tolerant ones\nThibaut Atche\, Cailabs           \n12:40 – 13:40  Lunch \n13:40 – 14:00  Laser welding of aluminium alloys for battery coolers using dynamic beam laser\nEyal Shekel\, Civan Laser \n14:00 – 14:20  Minimising risk when welding live cells to make modules and battery packs\nPhil Carr\, Carrs Welding \n14:20 – 14:40   Introducing laser welding to battery manufacturing\nBrett Ramshaw\, Alexander Battery Technologies \n14:40 – 15:10 Break \n15:10 – 15:30  Drying of battery electrodes: Technical & economical comparison of concepts\nAndre Eltze\, Laserline \n15:30 – 15:50   Beam Shaping Techniques to Enhance Laser Welding of EV Components\nAlex Griffiths\, PowerPhotonic \n15:50 – 16:50  Tour of WMG laser welding facilities  \n  \n  \nVenue\nWMG\nInternational Manufacturing Centre (IMC)\nUniversity of Warwick\nLord Bhattacharyya Way\nCoventry\nCV4 7AL \nEntrance is indicated on the map below (click for a large version)\nhttps://w3w.co/desire.voices.pines \n  \n  \nParking\n \nClick the map for an enlarged version \n\nYou can park in any car park marked P. The closest car park is Car Park 15 ringed on the map.\nThe easiest way to pay is by downloading the APCOA Connect parking app – see here for full details https://warwick.ac.uk/services/carparks/general_parking/\nAll-day parking costs £8.00 and can be pre-booked\nhttps://warwick.ac.uk/services/carparks/prebook/\n\n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/ailu-workshop-laser-applications-in-e-mobility/
LOCATION:Warwick Manufacturing Group\, WMG International Manufacturing Centre\, CV4 7AL\, United Kingdom
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/04/Laser-applications-e-mobility.jpg
ORGANIZER;CN="AILU":MAILTO:events@ailu.org.uk
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240702T090000
DTEND;TZID=Europe/London:20240703T170000
DTSTAMP:20260418T105024
CREATED:20240620T114141Z
LAST-MODIFIED:20240620T114629Z
UID:16623-1719910800-1720026000@www.ailu.org.uk
SUMMARY:TRUMPF OPEN HOUSE – 50th UK anniversary – 2nd & 3rd July 2024\, Luton
DESCRIPTION:This event is a prime opportunity for OEMs and subcontractors to be inspired by the latest sheet metal machines and software solutions\, from design through to automated manufacture.  Why not take this opportunity to see TRUMPF laser cutting\, punching\, welding\, bending and laser marking technology in action and speak to one of their technical experts face to face and see live machine and software demonstrations. \nFounded in 1974 TRUMPF Machine Tools Limited UK started with 5 employees.  During 1989 TRUMPF relocated to Luton as the new UK Headquarters.  Over the last 50 years TRUMPF Ltd have been proud to be a part of the ever-evolving sheet metal industry. \nRegister here: https://www.trumpf.com/en_GB/landing-pages/uk/trumpf-open-house-2024/ \n  \nContact: Lynda Mattingley \nlynda.mattingley@trumpf.com \n 
URL:https://www.ailu.org.uk/event/trumpf-open-house-50th-uk-anniversary-2nd-3rd-july-2024-luton/
LOCATION:TRUMPF\, Luton\, President Way\, Airport Executive Park\, Luton\, LU2 9NL\, United Kingdom
CATEGORIES:AILU MEMBER EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/06/TRUMPF-open-house.jpg
ORGANIZER;CN="TRUMPF":MAILTO:marketing@uk.trumpf.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240627T140000
DTEND;TZID=Europe/London:20240627T150000
DTSTAMP:20260418T105024
CREATED:20240509T124638Z
LAST-MODIFIED:20240710T132905Z
UID:16256-1719496800-1719500400@www.ailu.org.uk
SUMMARY:AILU Free Webinar: Safety of Hand-held Lasers
DESCRIPTION:Sponsored by\n \n  \n  \n  \n \nFree online webinar\n  \nWATCH HERE\n \n \nThursday 27th June 2024\n14:00 – 15:00 BST\n  \nDetails\nAre you considering purchasing a hand-held laser for welding\, cleaning\, marking? \nMake sure you know what the safety requirements are\, including: \n\nLaser eye safety (Goggles or face-mask)\nLaser skin safety (overalls\, gloves\, boots PPE)\nLaser safety for non-users (guarding/enclosure/room interlocking)\nFume extraction (safety for the operator and environment)\n\nPreetesh Mistry from laser safety experts Pro-Lite will guide you through the safety requirements and recommend how these systems can be used safely in a static or mobile application. \nAs well as a presentation\, there will be the opportunity to have questions answered in a Q&A session at the end of the webinar. \nThe webinar will be recorded and accessible for free via YouTube and Vimeo. \n 
URL:https://www.ailu.org.uk/event/ailu-free-webinar-handheld-laser-safety/
LOCATION:Online
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/05/pro-lite-laser-safety.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240618T090000
DTEND;TZID=Europe/London:20240619T170000
DTSTAMP:20260418T105024
CREATED:20240522T144525Z
LAST-MODIFIED:20240522T151324Z
UID:16392-1718701200-1718816400@www.ailu.org.uk
SUMMARY:PULSATE 2024: Laser Innovations Summit
DESCRIPTION:Join an enlightening two-day summit designed to showcase the latest advancements and applications of laser technology in manufacturing. The PULSATE 2024: Laser Innovations Summit is set to bring together industry leaders\, innovative thinkers\, and pioneering researchers to explore how laser technology is revolutionising manufacturing across various sectors. \nThe event is free to attend – register here https://ac.epic-photonics.com/pulsate-2024 \n  \nEvent overview \nThis event will feature a robust agenda filled with insightful keynotes\, comprehensive overviews\, and interactive sessions. Highlights include: \n\nA detailed exploration of the laser-based manufacturing landscape.\nEngaging discussions on the role of AI in laser manufacturing.\nSuccess stories from front-runners in the field.\nA round table with stakeholders from major industry players.\n\n  \nProgramme \nTwo day programme full of the latest advancements and applications of laser technologies in manufacturing. Detailed agenda is currently in preparation.  \n   \n Event Venue \nThe Summit will take place at The Square Convention Center\, Mont des Arts\, 1000 Brussels. \n   \nWhy attend?  \nThe PULSATE 2024: Laser Innovations Summit represents a unique opportunity to directly engage with advancements in laser technology that are setting new standards in manufacturing capabilities. Attendees will: \nGain invaluable insights into the future of manufacturing and how they can integrate these innovations into their own production processes. \nNetwork with top-tier industry experts and form strategic alliances. \nWhether you are looking to stay on the cutting edge of technological innovation or seeking solutions that can drive productivity and sustainability in your operations\, the PULSATE 2024: Laser Innovations Summit is an event you cannot afford to miss. Join in to be part of shaping the future of manufacturing!   \n\n\n\n 
URL:https://www.ailu.org.uk/event/pulsate-2024-laser-innovations-summit/
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/05/Pulsate_Final_event.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240618T080000
DTEND;TZID=Europe/London:20240619T160000
DTSTAMP:20260418T105024
CREATED:20240227T123659Z
LAST-MODIFIED:20240227T124239Z
UID:15815-1718697600-1718812800@www.ailu.org.uk
SUMMARY:PLI Conferences 2024 Bordeaux\, France
DESCRIPTION:This event is organised by the Club Laser & Procédés\, ALPhANOV\, Alpha-RLH\, Amplitude and Lasea France. \nIt is dedicated to industrial laser processes and their advances. An overview of the latest innovations in the field is presented through a rich program of expert conferences. \nThe 2023 edition brought together 165 participants and 33 booths including 47% manufacturers\, 17% technology centres\, 17% users and 11% academics\, coming from from more than 80 different companies and 13 different countries. \nThe conference program is organised around thematic sessions and time for discussion between participants. Simultaneous French/English translation will be provided. You will have access to coffee breaks and a lunch buffet. \nRead more here
URL:https://www.ailu.org.uk/event/pli-conferences-2024-bordeaux-france/
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/02/PLI-Conf-2024.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240605T093000
DTEND;TZID=Europe/London:20240605T130000
DTSTAMP:20260418T105024
CREATED:20240403T131048Z
LAST-MODIFIED:20240603T092500Z
UID:16051-1717579800-1717592400@www.ailu.org.uk
SUMMARY:AILU Early Careers Group Seminar
DESCRIPTION:Wednesday 5th June 2024\nCranfield University \n  \nFounded in 2017\, AILU’s Early Careers Group (ECG) represents the next generation of laser industry and academic professionals. Members of the Group are from a variety of industrial laser backgrounds including research centres and industrial manufacturers. \nOn Wednesday 5th June the Group will host a morning seminar followed by a tour of the laser facilities at Cranfield University. Members of the ECG will deliver presentations highlighting the current focus of their research or application area. \nThe seminar is open to AILU members and non-members and would be of interest to those who might like to join this group or would benefit from networking with this enthusiastic and talented pool of individuals. \n  \nProgramme\n09:30 – 10:00     Registration & Refreshments                                 \n10:00 – 10:05     Welcome                                     \n10:05 – 10:20     Multi-Energy System for Bead Shape Control\nDavid Rico-Sierra\, Cranfield University                   \n10:20 – 10:35     Enhancing Mass Transfer in LPBF: A Dive into Oscillating Laser Scan Strategies and Melt Pool Dynamics\nIoannis Bitharas\, Heriot-Watt University \n10:35 – 10:50     Laser Material Processing of Ceramic Matrix Composites\nPriyanka Ghosh\, MTC              \n10:50 – 11:05     Surface Engineering of AM Biomedical Implants\nRaja Abdullah\, University of Birmingham               \n11:05 – 11:35     Refreshments                                 \n11:35 – 11:50     Automated Assembly of Laser Systems\nDonald Risbridger\, Heriot-Watt University             \n11:50 – 12:05    Laser Surface Texturing of Stent Materials for Cardiovascular Applications\nJialin Dong\, Loughborough University                   \n12:05 – 12:25    The Latest Developments in AM at the Welding & Additive Manufacturing Centre (Keynote)\nGoncalo Pardal\, Cranfield University \n12:25 – 13:25     Lunch                                            \n13:25 – 14:05     Tour of laser facilities at Cranfield University                                        \n  \nVenue\nMartell House (Building 300)\n1st Floor East\, LR3\nCranfield University\nCollege Rd\nWharley End\nBedford\nMK43 0AL \nSee Site Map here \nMartell House is located at the south of the map in square B6-7 \nGetting to Cranfield – https://www.cranfield.ac.uk/About/How-to-find-Cranfield
URL:https://www.ailu.org.uk/event/ailu-early-careers-group-seminar/
LOCATION:Cranfield University\, College Rd\, Wharley End\, Bedford\, Bedfordshire\, MK43 0AL
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/03/Cranfield-image.jpg
GEO:52°04'18.4"N;0°37'42.2"W
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Cranfield University College Rd Wharley End Bedford Bedfordshire MK43 0AL;X-APPLE-RADIUS=500;X-TITLE=College Rd\, Wharley End:geo:0°37'42.2"W,52°04'18.4"N
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240516T100000
DTEND;TZID=Europe/London:20240516T160000
DTSTAMP:20260418T105024
CREATED:20240214T163115Z
LAST-MODIFIED:20240508T110300Z
UID:15698-1715853600-1715875200@www.ailu.org.uk
SUMMARY:AILU Workshop: Laser Micro Applications
DESCRIPTION:Sponsored by PI (Physik Instrumente) Ltd\n \n \n \n \n \nIntroduction\nChair: Jack Gabzdyl (TRUMPF Lasers UK) \nRecent advances in ultrafast lasers have seen them become more affordable\, reliable and compact. This\, combined with alternative (shorter) wavelengths is creating new applications which are able to match the needs of medical devices\, consumer electronics and displays. Attend this workshop to learn more about the cutting edge of small scale applications including cutting\, etching\, drilling\, texturing and additive manufacturing. Hosted at TRUMPF’s facility near to Luton Airport\, this event will include opportunities for exhibitors\, networking and sharing of research between academic and industrial manufacturing. \n  \nProgramme\n09:30 – 10:00  Registration & Refreshments \n10:00 – 10:10  Introduction & Welcome\nJack Gabzdyl\, TRUMPF \n10:10 – 10:30  Laser production of microparts – perspectives from a contract manufacturer\nNadeem Rizvi\, Laser Micromachining Ltd \n10:30 – 10:50  High throughput laser drilling of high-density precision microholes in metals: challenges and future prospects\nThemis Karkantonis\, Oxford Lasers \n10:50 – 11:10  Laser micro machining for medical device applications\nMike O’Key\, OpTek \n11:10 – 11:40 Break \n11:40 – 12:00  Ultra-short material processing of glass \nRichard Carter\, Heriot Watt University \n12:00 – 12:20  Surface integrity evaluation in laser micro-texturing\nManuela Pacella\, Loughborough University \n12:20 – 12:40  Optimisation of bio inspired Surface Texture designs in combustion systems\nSamuel Bigot\, Cardiff University             \n12:40 – 13:50  Lunch \n13:50 – 14:10  Laser structuring for spectral attenuation of different wavelengths and heat management\nJack Gabzdyl\, TRUMPF \n14:10 – 14:30  Laser Processing with Spatial Light Modulators (SLMs)\nJim Leach\, Hamamatsu \n14:30 – 14:50  USP laser platform for cutting-edge solutions\nAntonio Raspa\, Luxinar \n14:50 – 15:20 Break \n15:20 – 15:40 Laser micro-machining for hydrogen applications\nMitchell Leering\, MTC \n15:40 – 16:00 Femtosecond glass processing using bessel beam shapers\nScott Barrie\, PowerPhotonic \n  \nVenue\nTRUMPF Ltd\nUnit A\nPresident Way\nAirport Executive Park\,\nLuton\nLU2 9NL \n  \nAccommodation\nRecommended Hotel: \nPremier Inn St Albans City Centre\n1 Adelaide Street\nSt Albans\nHertfordshire\nAL3 5BH \nSat Nav Directions:  AL3 5EB \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/ailu-workshop-laser-micro-applications/
CATEGORIES:AILU EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/02/Micro-workshop-image.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240515T143000
DTEND;TZID=Europe/London:20240515T153000
DTSTAMP:20260418T105024
CREATED:20240227T093038Z
LAST-MODIFIED:20240514T101355Z
UID:15797-1715783400-1715787000@www.ailu.org.uk
SUMMARY:AILU's 30th Annual General Meeting 2024
DESCRIPTION:Notice of the 2024 Annual General Meeting\nThe 30th Annual General Meeting of the Association of Industrial Laser Users will take place from 14:30-15:30 on 15 May 2024 at TRUMPF\, Luton. \nAILU Member Event\, free to attend. \n \nVenue\nTRUMPF Ltd\nUnit A President Way\nLuton\nLU2 9NL \nSee further information here  \nThe meeting is a Hybrid meeting so online attendance is also possible: here \n  \nDocuments\nNotice of AGM \nAgenda  \nMinutes of the last meeting \nAILU Accounts to 31 Oct 2023
URL:https://www.ailu.org.uk/event/ailus-30th-annual-general-meeting-2024/
LOCATION:TRUMPF\, Luton\, President Way\, Airport Executive Park\, Luton\, LU2 9NL\, United Kingdom
CATEGORIES:Members only
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240423T010000
DTEND;TZID=Europe/London:20240425T090000
DTSTAMP:20260418T105024
CREATED:20240227T121712Z
LAST-MODIFIED:20240227T123232Z
UID:15809-1713834000-1714035600@www.ailu.org.uk
SUMMARY:5th Smart Laser Processing Conference 2024\, Japan
DESCRIPTION:Organised by the Japan Laser Processing Society (JLPS) \nLaser beam processing has played an important role in industrial fields of not only macro-products but also micro-products\, and its technologies are essential to open the new strategies of smart manufacturing such as highly integrated\, accurate\, efficient processing with low energy consumption. \nSLPC2024 deals with science and technology of smart laser materials processing including micro and macro laser processing. SLPC2024 is planned as a three-day event with a plenary session\, oral sessions and poster session. \nThe aim of this conference is to provide a forum for discussion of fundamental aspects of laser-matter interaction\, the state-of-the-art of smart laser processing\, and topics for the next generation with fundamental scientists\, end users and laser manufacturers. \nFind out more here
URL:https://www.ailu.org.uk/event/5th-smart-laser-processing-conference-2024-japan/
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/02/SLPC-2024-Japan.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240415T090000
DTEND;TZID=Europe/London:20240419T170000
DTSTAMP:20260418T105024
CREATED:20240227T120606Z
LAST-MODIFIED:20240227T120941Z
UID:15806-1713171600-1713546000@www.ailu.org.uk
SUMMARY:MACH Exhibition 2024
DESCRIPTION:Come and visit us at MACH 2024. We will have a stand in the Lasers for Manufacturing zone\, Hall 17 stand 541.   \nMACH 2024\, the national event for inspiring\, innovating and connecting manufacturing\, will be one of the most important shows of its kind ever staged in the UK. Resolving the current challenges facing the industry – soaring energy prices\, rising labour costs\, skills shortages\, the escalating price of raw materials\, supply chain disruption and the need to effectively tackle the green agenda by seizing the opportunities posed by decarbonisation\, will all receive special focus. \nSee here for more information \nContact: Dave MacLellan \ndave@ailu.org.uk \nhttps://www.ailu.org.uk/ \n 
URL:https://www.ailu.org.uk/event/mach-exhibition-2024/
LOCATION:NEC Birmingham
CATEGORIES:AILU - SUPPORTED EVENTS
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/02/mach-2024-logo.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20240314T110000
DTEND;TZID=Europe/London:20240314T120000
DTSTAMP:20260418T105024
CREATED:20240125T144405Z
LAST-MODIFIED:20240326T154717Z
UID:15555-1710414000-1710417600@www.ailu.org.uk
SUMMARY:AILU Event - Free Webinar: Hand Held Laser Welding
DESCRIPTION: \nA video of this event can now be viewed on YouTube\nWATCH HERE\n  \n  \nSponsor: SS Laser Solutions\n\n \n  \n  \nSinan Bilgin\, Presenter\n \n \n \n \n \n \nTOPICS FOR THE WEBINAR:\n– What is laser welding?\n– Differences of laser welding compared to TIG/MIG welding\n– Details of handheld laser welding\n– Components of handheld laser welding system?\n– How to choose the right components for your system?\n– Cooling techniques of handheld laser welding machines\n– Optics are everything! How to keep an eye on them?\n– Is the training essential and how long it should be?\n– Safety first! What actions do you need to take?\n– Questions & Answer – 15 minutes at the end to ask anything \n  \nWHO SHOULD ATTEND ?:\nThis webinar is aimed at the sheet metal fabrication industry. If you are currently TIG or MIG welding sheet metal and you are looking to improve the speed and quality of your in-house fabrication\, this webinar is for you. Experienced welders are hard to come by\, but with Handheld laser welding you can quickly learn to achieve excellent results with a short learning cycle.  So\, even if you don’t have an experienced welder in-house\, this webinar is for you.  \nSS Laser Solutions are experts in the skill and suppliers of the equipment. Use this webinar to explore whether laser welding is right for your business and to find out about the differences compared to conventional welding. Not all systems are the same and not all suppliers can offer the training\, service and hand-holding needed to implement this process in your facility. \nRegister FREE using the link on this page and the meeting will run on ZOOM on 14 March at 11.00 AM GMT.\nIf you can’t attend the event live\, it is also being recorded and will be available to watch online (YouTube/Vimeo) after the event.\nRegister to receive a follow-up link to view the content at your leisure.  \n  \n  \nAILU EVENT T&Cs\nSee AILU Event Terms and Conditions here.\n____________________________________\nBy registering for this meeting you agree that you are happy for AILU and Sponsors to contact you after the event
URL:https://www.ailu.org.uk/event/ailu-webinar-hand-held-laser-welding/
LOCATION:Online webinar
ATTACH;FMTTYPE=image/jpeg:https://www.ailu.org.uk/wp-content/uploads/2024/01/SSLS-free-AILU-Webinar.jpg
ORGANIZER;CN="AILU":MAILTO:events@ailu.org.uk
END:VEVENT
END:VCALENDAR